Table of Contents

YawFaultLimp coming soon

https://bladednextgen.dnv.com/schema/0.4.1/TimeDomainSimulation/Event/YawFaultLimp.json

Not supported yet

A fault in the yaw system where the yaw system is left without actuation. The reaction torques are specified, and if these forces are overcome, the yaw bearing will move.

  • EventType: string = YawFaultLimp
  • TimeOccurs: number (s)
  • OnComponentInAssembly: string
  • Friction: number (Nm/rad)
  • Stiffness: number (Nm/rad)
  • Damping: number (Nms/rad)

A type of Event

Properties

TimeOccurs: number (s), optionalcoming soon

The time at which the event occurs. This is measured from the start of the output recording, and ignores any lead-in time.

OnComponentInAssembly: string (AssemblyReference), optionalcoming soon

A reference to the component in the assembly to which this applies.

EventType: stringcoming soon

Defines the specific type of Event model in use. For a YawFaultLimp object, this must always be set to a value of YawFaultLimp.

Friction: number (Nm/rad), optionalcoming soon

The kinetic friction in the yaw bearing and any connected systems.

Stiffness: number (Nm/rad), optionalcoming soon

The stiffness of the yaw system, if it has failed without actuation.

Damping: number (Nms/rad), optionalcoming soon

The damping on the yaw system, if it has failed without actuation.