TowerPointLoading coming soon
https://bladednextgen.dnv.com/schema/0.4.1/TimeDomainSimulation/AppliedLoad/TowerPointLoading.json
Not supported yet
A time history of point loading applied to an axisymmetric tower.
AppliedLoadTypeTowerPointLoadingStartTimeLoadingFilepathDirectionOfLoadingOnComponentInAssemblyHeightOfImpact
A type of AppliedLoad
Properties
StartTime: number (s), optionalcoming soon
The time into the simulation at which to start applying the loading (excluding the lead-in time).
LoadingFilepath: string, optionalcoming soon
A filepath or URI containing one or six degree of loading data. In the case of the six degrees of freedom, these will be applied in the component's coordinate system. Where a single degree of freedom is provided, SingleDirectionLoading must also be specified.
DirectionOfLoading: object(Vector3D), optionalcoming soon
The direction in which a dingle degree loading should be applied, in the component's coordinate system.
default = {'X': 1, 'Y': 0, 'Z': 0}
OnComponentInAssembly: string (AssemblyReference), optionalcoming soon
An assembly reference to the specific component to which to apply the force.
AppliedLoadType: stringcoming soon
Defines the specific type of AppliedLoad model in use. For a TowerPointLoading object, this must always be set to a value of TowerPointLoading.
HeightOfImpact: number (m)coming soon
The height up the tower that the force is to be applied, measured from the bottom of the tower component.
default = 0